|
|
 |
|
|
| |
CYCLOPS SU500C-14 Series: Build-in LED power dimmer 5.0M pixels, Internal sync, color
 |
 |
[Camera]
- Full bus powered (i.e. no external power is required)
- Adopt USB 3.0 interface, Plug-and-Play
- Adopt industrial high performance device driver
- 1 Input TTL type digital Input lines (options)*
- Free and powerful SDK OVK-Lite helps user to acquire image even in 1minute
- SDK provides the function of image management---Image Queue, support multi-threaded processing
- Support long exposure mode, it also can acquire an image clearly in darker conditions
- Free and powerful Camera Grab Tool software helps user to measure geometric shape precisely and easily
- Provide automatic LED Light and sensor exposure sync mode, the LED light will start to light and the sensor will start to exposure at the same time. Note! This function is only for Cyclops Series camera to use.
*The max input current of digital input is 25mA. Standard TTL. To avoid the digital input damaging, we suggest user to use optical coupler OC) or relay to input the current indirectly, if user used power supply to input the current.
|
 |
[Camera]
- Color 2592x1944 @ 14 fps、1/2.5” sensor
- Progressive scan readout mode
- Support dynamic range mode, it also can acquire an image clearly in higher contrast
- Build-in irregular pixel correcting circuit
- Support real-time Horizontal and vertical flip
- WOI (Window of interesting) is supported for flexible resolution output
- Support Horizontal and vertical sub-sampling (over up to 2x) mode, in this mode it can decrease output resolution and increase frame rate
- The maximum pixel rate is about 70.54 MP/s.
- Compatible with popular operating systems:
32-Bits: Windows 7、8、8.1
64-Bits: Windows 7、8、8.1、10、11
- Adopt industrial connector with robust screw-locker to prevent to slip
- If users buy camera, they can get a 3-meter USB cable (general) for free. However, additional payment will be charged if they want a USB cable exceeding 3 meters.
[LED Power Dimmer]
- Build-in one channel LED power dimmer, helps user to control the LED by using software directly
- Standard 12V @1.0A(Max) industrial DC output
- Provide stable current output; [1.2W]12V/100mA、[2W]12V/166mA、[6W]12V/500mA、[12W]12V/1000mA* current output; CYCLOPS SU Series Camera applies to any type of 12V LED light module.
*[12W]12V/1.0A recently launched
- Adopt stable voltage protection and stable current control
- Using software to control switch and illumination (1024 level)
- Support normal、high power and super high power LED light module (two pin connector interface).
- Tightly integrated with CYCLOPS Series Camera, using AxAltairU component to control power dimmer directly
- Adopt DC24V external power.
Cyclops SU series Dimension 3D |
 |
| iten |
contents |
| Sensor Type |
CMOS |
| Sensor Resolution |
Active：2592(H) x 1944(V) |
| Effective Image Area |
5.700 x 4.280 (mm) |
| Sensor Format |
1/2.5” |
| Pixel Dimension |
2.2 x 2.2 μm Square Pixel |
| Video Output |
24 bits True Color |
| Max. Frame Rate |
14 fps |
| Dynamic Range |
66.5 dB |
| Electronic Shutter |
Global Shutter, 128.0us~250.0ms |
| Fill Factor |
49 % |
| FPN |
0.1 % |
| PRNU |
1.5 % |
| Microlens |
Bayer Pattern |
| Operation Mode |
Video and Standby Mode |
| Scanning Mode |
Progressive Scan |
| Gain / Offset |
Programmable Gain / Offset Adjustment |
| Frame Rate Control |
software control: Max 14.0 fps
|
| Sub-sampling Mode |
Vertical and Horizontal Sub-sampling |
| Black Level Compensation |
Automatically Compensate by Hardwired Circuit |
| White Balance |
Auto / Manual / 7 Preset |
| Windowing |
WOI ( Window of Interest )
|
| Digital Data Interface |
USB 3.0 , 5.0 Gbps |
| Power Consumption |
< 2200 mW, USB Bus Powered Only , No external power required |
| Operation Temp. |
0.0 ℃ ~ 60.0 ℃ |
| LED Power Consumption |
1.2W(100mA)/ 2W(166mA)/ 6W(500mA)/ 12W(1.0A) recently launched |
| LED Power Dimmer |
DC24V external power, stable current feedback control, illumination control(0~1024 level) |
| Dimension (mm) |
35x35x64.5 |
| Weight (g) |
108g |
|
|
|
